Qmobile J7 Flashing Soloution With CM2 Dongle

Qmobile J7 Flashing Soloution With CM2 Dongle

Qmobile J7 Hang on Logo Recover Done With Great Tool Cm2

Card found : S/N : 454F9D64 , v0134
Chinese Miracle II  [MTK module] v 1.58

Scatter Load Ok , BaseBand : MT6595 , Project : gionee6595_lwt_m , Storage : EMMC
Files found : 9 , Set to Flash : 8
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : QMobile
Device Model   : J7
Device CPU     : MT6595
Device IntName : J7
Device Version : 6.0
Device Compile : 9/21/2016 4:51:12 PM
Device Project : WBL5708QM_0201_T5363
Device ExtInfo : J7
Ready to Flash!

Operation : Flash [ v1.58 ]

Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 50 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6595
BB_CPU_NME : [MediaTek] MT6595_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x8C
NAND Flash : NOT INSTALLED
eMMC Flash : 150100424A4E42345207551947A683CF
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , R4BNJ
[eMMC] : FLASH_CID : 150100424A4E42345207551947A683CF
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID    : 0x3D19A976D55E7065CA0212CD95416D8B
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6595 , Project : gionee6595_lwt_m , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify :  Enabled
Setting : HW verify :  Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : Only one records found, and determined as universal
BL : eMMC supported by BootLoader!

BL : BatteryLevel : Unknown (not supported or without battery)

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000001C80000-0x0000000002F20000
Erase : 0x0000000004CA0000-0x0000000741EE0000
Flash Pre-Erase Done, time used : 00:00:01

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ... 
Use : preloader_gionee6595_lwt_m.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0010
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : LK
Image Flash Ok
Flash now : BOOT
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SECRO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : SYSTEM
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USERDATA
Image Flash Ok
Flash Write Done, time used : 00:07:19

Processing : Verify
Verify Passed : LK
Verify Passed : BOOT
Verify Passed : RECOVERY
Verify Passed : SECRO
Verify Passed : LOGO
Verify Passed : SYSTEM
Verify Passed : CACHE
Verify Passed : USERDATA
Data Verify Done, time used : 00:00:48

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:08:29
Reconnect Power/Cable!

ليست هناك تعليقات:

إرسال تعليق