مرحبا إليك تجميعة كبيرة من الأخطاء التى تواجهك أثناء الرسيتور لهواتف iPhone عبر برنامج itunes وكيفية حلولها بطريقة سهلة وبسيطة، الأخطاء بالانجليزية.
Error 1 Error 2 Error 6 Error 10 Error 11 Error 13 Error 14 Error 17 Error 23 Error 26 Error 37 Error 1002 Error 1013 Error 1014 Error 1015 Error 1413 Error 1415 Error 1417 Error 1418 Error 1428 Error 1600 Error 1602 Error 1603 Error 1604 Error 1611 Error 1619 Error 1644 Error 2002 Error 3XXX Error 3002 Error 3004 Error 3014 Error 3194 Error 3195 Error 11222 0xE8000022 0xE800003D 0xE800006B
Errors -9815
Set exact date, restart computer.
Errors -9814
Set exact date, restart computer.
Errors -9800
Set exact date, restart computer.
Error -50
Delete Storm Video, QuickTime, iTunes, then reinstall iTunes.
Error -35
Unable to downgrade. Try changing the USB port (the back one of chassis is better) and restart computer.
The installed version of iTunes may also be too old. Update iTunes.
Sn0wbreeze 1.6 Custom Firmware has a ASR patch problem. Use sn0wbreeze 1.7 or PwnageTool. Device isn't bootable.
Not enter the downgrading mode, change USB port (the back one of chassis is better) and restart computer.
LLB is missing from the IPSW. The device cannot be booted up. The trick to skip the baseband update no longer works.
Removed bbfw file in the firmware folder of an unzipped IPSW.
Occurs when you want to install a beta firmware with iTunes for Windows (actively blocked by Apple; beta users are developers and therefore must have a Mac).
Error 13 may also signify a USB problem. Check the USB connection and try other direct ports or maybe the USB cable is an older one. Device isn't bootable.
Custom firmware update fail (PwnageTool). You have to restore the device with a custom firmware. Update to a custom firmware isn't working. Device isn't bootable. 2
USB Problem. Check the USB connection and try other direct ports or maybe the USB cable is an older one. Device isn't bootable.
Custom firmware update fail (sn0wbreeze). You have to restore the device with a custom firmware. Update to a custom firmware isn't working. 2
Baseband Communication error (Hardware), Most probably Baseband chip is faulty.
False version of the NOR flash firmware. Use the correct sn0wbreeze version.
iPod touch 2G LLB patched with the 0x24000 Segment Overflow was used on an iPhone 3GS custom firmware. Known on damaged bundles from unofficial PwnageTool distributions or bundles.
Are you restoring to a stock apple firmware or a custom pwn firmware? Either way make sure you are in DFU mode first.
Error 1004
This is caused by a failure to match the Baseband Nonce currently in memory to the Nonce returned in the Baseband Firmware SHSH blob. This is a normal part of iPhone 4 local restores via TinyUmbrella. 1
Restart computer; change computer; reinstall system, if iPhone is always in restoring mode: XP users can jump from restoring mode with ibus; MAC users can use iNdependence. (usually on the iPhone with 1.0.2 firmware downgraded from 1.1.1)
This error is down to iTunes not liking your USB ports on your computer. Use a different USB slot or a different computer if possible. That is the easiest fix!
Restart computer; change computer; reinstall system, if iPhone is always in restoring mode: XP users can jump from restoring mode with ibus; MAC users can use iNdependence. (usually on the iPhone with 1.1.1 firmware downgraded from 1.1.2) Baseband firmware on the IPSW is higher than the baseband firmware on the iPad/iPhone. 1
Restart computer; change USB port; reinstall system.
Restart computer; change USB port; reinstall system.
Restart computer; change USB port; reinstall system.
Restart computer; change USB port; reinstall system.
Restart computer; change USB port; reinstall system.
Custom firmware can't be restored on a device with DFU Mode. Use Recovery Mode.
Restart computer; change computer; reinstall system.
False kernel cache patch. Known on damaged bundles from unofficial PwnageTool distributions or bundles.
Device was not pwned (signature checks were not blocked). Custom firmware can't be restored.
iTunes tried to enter the Restore Mode, but the device turned back to the Recovery Mode.
iTunes is too old and couldn't read the iPhone in Recovery or DFU Mode. Please update iTunes and try it again.
IPSW was moved during prepare with iTunes. Try it again and don't move the IPSW.
iTunes can't connect because another program is using it or it's disconnected during the Apple Server check.
iTunes can't connect to gs.apple.com. Maybe Port 80 and Port 443 is blocked. Open it on your router.
Update to an older firmware isn't working, because Apple is no longer handing out SHSHs for the device/firmware combination.
No internet connection during the firmware restore.
False edited hosts. The SHSH request couldn't be completed. No connection to the Apple Server, Sauriks Server or localhost.
Occurs when trying to install an old firmware and Apple's server disallows the installation. The only solution is to have SHSH backup and modify the hosts file to point to Saurik's Cydia server where they are backed up (or localhost if you have it yourself).
"An internal error occurred." Missing SHSH for the firmware. Maybe the same as "This device isn't eligible for the request build." but with an cache error.
internet options Connections tab Click LAN Settings uncheck "use a proxy server"
Searching..........
False permissions in the Carrier Bundle folder. Restore, update or fix the permissions from the carrier bundle to update the carrier settings via iTunes.
Device was suddenly unplugged. iTunes couldn't connect with the device. Try it again.
0xE8000065
sn0wbreeze custom cirmware error on USB connection. Unplug the device, reboot it, and plug it in again.
ليست هناك تعليقات:
إرسال تعليق